This unit has the low ambient electrically controlled fan louver options for year round process cooling, yet equally as good for a comfort cooling application. If you need 460 volt, there are some very affordable step down transformers on eBay now and we can help you select the right one. This unit was run and tested in our Massachusetts facility prior to being shipped to a customer. This unit received two New Danfoss 15 hp SCROLL compressors with 0 HOURS! , was converted to R407C refrigerant, and got new dryers and new oil. Run and tested prior to shipping, and offered with money back guarantee of functionality. Arrived at KIG in November 2015 was this perfect condition 2010 Carrier 30 ton RAP Series Air Cooled Chiller. One compressor is digital scroll for maximum efficiency and stage for lower load conditions.

Acquired by KIG in March 2015 was this nice 50 ton Koolant Koolers / Dimplex Thermal 50 ton Air Cooled Chiller. It was stored at a California riggers yard, we had it inspected and controls powered up, and it had 0 COMPRESSOR HOURS, and 0.16 PUMP HOURS! We learned that the prior owner had it installed at the same time a cooling tower and pump tank which they discovered achieved all their required cooling. In addition to being a desirable size, it also has an onboard 15 hp process pump and onboard reservoir tank. It has 8 cooling fans, 4 of them with VFD low ambient controller. It has a brazed plate exchanger and utilizes a nice high end 50 hp Bitzer Compressor.

injection molding chiller

The expansion valve expands the refrigerant from liquid form to gaseous form before it enters the evaporator. One area of heating and cooling air in a home or commercial facility that’s often wondered about is the difference between an air conditioner and an air chiller system. While they both have generally the same goals in terms of regulating air temperature, each system works in a very different manner and produces very different results. Here are the key differences you need to know as you look at AC installation in Loganville, GA. Along with rental equipment, we build custom air handlers to allow for service without tearing down walls. Our specialists collaborate with you to maximize the productivity of your facility, including almost any type or style of coil for nearly any application. The Internet of Things provides the data collection tool that can enable AI applications such as predictive maintenance.

When you use this system, the cooling tower that it’s combined with will send water to properly cool and condense the primary coolant that you’re using. Any unwanted heat from the chiller will be sent into the cooling tower before being dispersed into the outside air. There are two notable types of industrial chillers that you can select for your cooling needs, which include a water-cooled chiller and an air-cooled chiller. A water-cooled chiller is a type of chiller that’s usually combined with a cooling tower for large-capacity applications like water-jet cutting and food processing. With large-capacity applications, it’s possible that an air-cooled chiller will generate too much heat. Since a water-cooled chiller is typically combined with a cooling tower, it allows for the maximum amount of efficiency that’s possible with these systems.

And you can save even more when you also use the CX34 for water heating. The Arctic Chiller Group serves a wide range of markets and industries. With our extensive chiller capabilities, we can fulfill virtually any request. The Arctic Chiller Group has manufacturing facilities in Canada and the United States, with chiller installations worldwide. If your process requires customization, here are options that may be added to manufacture a chiller specific to your needs. Both thermoregulatory tools achieve a similar effect, but their mechanisms operate differently. This article will highlight the differences between a dry cooler vs. chiller and help you decide which is best for your cooling needs.

SCY Chiller is a professional manufacturer of industrial chiller, air-cooled chiller, water-cooled chiller, glycol chiller from China. A number of factors influence the correct size of chiller required for your application. While standard Btu calculations can be applied, and our Multi Temp Chiller Specifications can offer some guidelines, the parameters of your application will be the deciding factor in correct size selection. Contact us today for help with sizing the perfect unit for your needs. Contact our team of experts for industrial equipment and commercial refrigeration solutions. We offer emergency boiler rentals, short term equipment rentals and long term equipment rentals, and serve a range of industries from apartment complexes and medical facilities to chemical plants. Call us today to get started on a quote, or to learn more about our commercial equipment rental services. Chilled water buffer tanks are vital components in modern chiller systems. Air-cooled condensers resemble the “radiators” that cool automobile engines.

It is widely used in electronics, electroplating, food, machinery, chemical, laser, card making, medical and other industries. Because the source of heat exchange is gas and it is equipped with a special electric fan, it is called “air cooling”. S&A Teyu CW-3000 series thermolysis type recirculating industrial water chillers are able to cool CO2 laser tube,CNC spindles,welding equipment, lab equipment or low power equipment. Water-cooled chillers are installed in the building, therefore protected by the elements and giving them a longer lifespan. At times, this is the only option for larger installations and can provide better energy efficiency. Low-pressure water-coolers offer a significant reduction in emissions over the system’s lifetime . Let’s be real, money one of the most important factors when looking at what chiller to install. Initially, air-cooled chillers are lower than water-cooled chillers.

When buying a used chiller, quality and reliability are main concerns. All of our inventory goes through a rigorous testing process to ensure your used chiller runs properly when it arrives at your location. This doesn’t include water treatment cost or any other related costs. There are so many advantages & disadvantages associated with both types of chillers. We select the appropriate type according to our requirement & also cost is a primary factor as well. Chillers are common now a days & are being used everywhere; in comfort air conditioning- small or large commercial buildings & for process cooling purposes as well. With 40% of your building’s operating expenses tied to energy and HVAC management, you need better visibility to unit performance. Intelligent Equipment®, our remote monitoring platform, connects directly to Pathfinder to monitor your building’s energy consumption for deeper, more accurate performance measurement. Buyers are advised to purchase the highest-efficiency chiller estimated to be cost-effective. A chiller optimized for high full-load efficiency is appropriate for full-load operating conditions; for a chiller that will be operated at part load, a chiller optimized for high-IPLV efficiency is appropriate.

•Golden service :Service call response within 1 hour, solution offered within 4hrs, and own oversea installation and maintenance team. •Stable staffs :Stable staffs can ensure stable and high quality productivity. To ensure high quality service and efficient after-sales support. •Brand strength :We are the professional and top supplier of industrial chiller with 20 years of experience. Air-Cooling and Water-cooling chillers are further categorized by the type of compressor technology used. From raw material inspection, production inspection, and overall inspection control, all processes follow strict guideline. In order to keep the first-class quality, we inspect every product before sending it out and make regular market research with our clients’ help to improve the quality.

As a leader of an air-cooled screw chiller supplier, TopChiller can provide not only standard configuration air-cooled screw chillers but some other customized air-cooled chillers. The above original quality refrigeration spare parts will ensure each air-cooled screw chiller at a steady running condition. Our engineers and technicians have decades of experience with the major manufacturers in the industry. We offer this expertise to you to help you solve your equipment problems and provide a cost effective solution that will meet your needs. Dunham-Bush offers various kinds of speciality products in the market some of which are patented. The Federal Energy Management Program provides acquisition guidance for air-cooled electric chillers, a product category covered by FEMP efficiency requirements. Make sure to drain out the tank water if the air-cooled chiller no use for a long while when your factory closed or on holiday time. TopChiller® has designed a series of air-cooled chillers whose cooling capacities range from 0.2 Ton to 550 Ton. If the air-cooled chiller operates and produces too much noise, the air chiller unit cannot be defined as efficient.

General Air Products offers a line of air cooled chillers tailored to the needs of brewery applications. Cooling Power offers air cooled chillers to meet a wide variety of needs and demands. Contact us today for a free quote or to help determine the best option for you. Air-cooled chillers actively absorb heat from process water; they then transfer this heat into the air around the chiller unit. This type of unit is typically used in areas where additional heat discharge is not an issue, but instead works as a benefit. For instance, the additional heat can be used to warm a space during the winter for less money than traditional heating systems.

This high-quality heat source literally comes for free and can be captured and put to good use. The optional repurposing of available engine waste heat is what turns a TECOCHILL into an elegant “mechanical” cogeneration system. The exhaust air damper needs to be inspected for proper operation, have the bearings lubricated, and calibrate or adjust it for optimal operation. Each item is important and diligent chiller maintenance will save money and make the system last longer. In-Rack Manifolds provide a common connection point between Motivair’s Dynamic Cold Plates™ and the supply and return cooling infrastructure system or CDU. Motivair’s In-Rack Coolant Distribution Unit , with redundant circulating pumps, features a 4U design, capable of placement in top or bottom of any standard 19” rack enclosure. Motivair’s Dynamic Cold Plate represents the next phase of delivering effective, reliable liquid cooling at the chip level. Motivair’s Modular HPC Data Center is a total high-density environment ensuring power, space, scalability, and cooling today and into the future.

Leave a Reply

Your email address will not be published. Required fields are marked *